K-SEAL - PERMANENT COOLANT LEAK REPAIR

PERMANENT COOLANT LEAK REPAIR WITH A UNIQUE CERAMIC FORMULA Repairs most coolant system leaks in the block, head, radiator & heater matrix Mixes with all types of Antifreeze & Coolant Save time and Money Avoid time consuming and expensive mechanical repairs that could cost you hundreds of dollars K-Seal is simple to use: No need to flush cooling system unless contaminated with oil, sludge etc. Shake bottle (at least 30 seconds) to ensure the contents are evenly mixed. Add entire contents to radiator or overflow tank. ...and your done How does K-Seal work? When there is a crack or hole in the cooling system K-Seal finds the low-pressure area and deposits the special ceramic micro-fibre and copper formulation as it flows through the damaged area. Within seconds the crack or hole is completely filled with ceramic micro-fibres and copper and the repair has been made. This seal is further enhanced by heat to form a repair that will last the life of the engine. K-Seal is specially formulated to permanently seal cracks in the engine block and head. This unique product is guaranteed to mix with all types of glycol based coolant and antifreeze. K-Seal can be used to seal holes and cracks in the head gasket, radiator, heater core, core plugs, water pump casing and other metal components of the cooling system in both petrol and diesel engines. One 236ml bottle of K-Seal will treat cooling systems up to 20 litres in capacity. K-Seal will NOT repair holes or cracks greater than 0.75mm wide. Dont waste money on quick fix Old Technology Products